78
Setting Up Do Not Disturb
• Block telephone numbers for incoming calls:
If you block a number for incoming calls, the FRITZ!Box
will no longer accept any calls from this telephone num-
ber—provided that the caller did not suppress her or his
number. In this way you can block connections from un-
wanted callers.
You can also set up a call block for all callers who do not
transmit their telephone numbers (anonymous callers).
Setting Up a New Call Block
1. Open the FRITZ!Box user interface (see page 31).
2. Select the “Telephony / Call Blocks” menu.
3. Click the “New Blocking Rule” button.
4. Select whether the call block is to apply to incoming or
outgoing calls.
5. Enter a range of numbers or a number.
6. Save the settings by clicking “OK”.
This concludes the configuration of the call block.
12.7 Setting Up Do Not Disturb
In the FRITZ!Box night service you can set up a do not disturb
function so that none of the connected telephones and other
terminal devices signal calls. At a time freely defined by the
user (for instance 11:00 p.m. – 6:00 a.m.) the terminal devic-
es then will be set as follows:
• Connected telephones will not ring.
This is not the case for IP telephones. It is not possible to
set up do not disturb for IP telephones in the FRITZ!Box.
• Connected fax and answering machines are disabled.
The do not disturb setting has no effect on fax reception
or the answering machines integrated in the FRITZ!Box.
FRITZ!Box_7360-en.fm Seite 78 Mittwoch, 15. Februar 2012 5:21 17
To Next Page
Loading...
Need help?
General
Weight and Dimensions
