To Next Page

To Previous Page

Configuring the Internet Connection for Cable

5. In the “Annex Settings” area, make sure that the annex

working on your DSL line is set. Save your settings by

clicking “Apply”.

After the annex setting has been changed, the FRITZ!Box re-

starts automatically. The connection to the DSL network has

been established as soon as the “Power / DSL” LED stops

flashing and remains lit up.

6.3 Configuring the Internet Connection for Cable

With an additional cable modem you can also use your

FRITZ!Box 7360 on a cable connection. Then the Internet con-

nection is established and controlled by the FRITZ!Box itself,

so that in this operating mode, too, all FRITZ!Box functions

(like Internet telephony, firewall) are available without restric-

tion.

1. Open the FRITZ!Box user interface (see page 31).

2. Select “Wizards” in the menu.

3. Click the “Check Internet Connection” Wizard and follow

the instructions.

6.4 Configuring the Internet Connection for the Mobile Telephone

Network

With a USB modem you can also establish the Internet con-

nection with your FRITZ!Box 7360 via the mobile telephone

network. A USB modem for mobile Internet access

(UMTS/HSPA) is required for this. The FRITZ!Box supports

UMTS/HSPA modems from various manufacturers.

The USB modem is already installed on the USB port of the

FRITZ!Box.

1. Open the FRITZ!Box user interface.

2. In the “Internet” menu, the sub-menu “Mobile Tele-

phone Network” is displayed.

FRITZ!Box_7360-en.fm Seite 36 Mittwoch, 15. Februar 2012 5:21 17

Other manuals for AVM FRITZ!Box 7360

Questions and Answers:

Need help?

Do you have a question about the AVM FRITZ!Box 7360 and is the answer not in the manual?

General

Plug and Play	Yes
Internal memory	512 MB
RJ-11 ports quantity	2
Ethernet LAN (RJ-45) ports	4
Bandwidth	2.4 GHz
Rack mounting	No
Ports quantity	The number of ports or external interfaces to which other equipment can be connected.
Frequency range	2.4 - 2.4835 GHz
Power supply type	DC/11W
Dimensions (WxDxH)	226 x 159 x 47 mm
USB connector type	USB Type-A
WLAN data transfer rates supported	300 Mbit/s
Cables included	LAN (RJ-45), Phone (RJ-11)
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Firewall security	IPv6
Security algorithms	128-bit WEP, 64-bit WEP, WPA, WPA2
Power supply	11 W
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	8 W
Product color	Red