AVM FRITZ!Box 7360 User Manual

Switching the Alarm On and Off
131
19.4 Switching the Alarm On and Off
You can use the telephones connected to the FRITZ!Box as
alarms. The alarm can be set individually and enabled or dis-
abled at any time.
Configuring the Alarm for a Telephone
N Pick up the handset.
r881s<time>s
<internal telephone num-
ber>s
Defines the time at which the telephone
with the specified internal telephone
number will ring.
For instance, enter
r881s0700s1s if the tele-
phone on the “FON 1” socket should
ring at 07:00 a.m.
Internal numbers:
Socket “FON 1” of the FRITZ!Box: 1
Cordless DECT telephones: 610 – 615
IP telephones: 620 – 629
r91ss Save your settings.
O Hang up the receiver.
Enabling the Alarm
N Pick up the handset.
r881ss Enable the alarm function.
r91ss Save your settings.
O Hang up the receiver.
Disabling the Alarm
N Pick up the handset.
r881r Disable the alarm.
r91ss Save your settings.
O Hang up the receiver.
FRITZ!Box_7360-en.fm Seite 131 Mittwoch, 15. Februar 2012 5:21 17

AVM FRITZ!Box 7360 Specifications

General

Plug and Play	Yes
Internal memory	512 MB
RJ-11 ports quantity	2
Ethernet LAN (RJ-45) ports	4
Bandwidth	2.4 GHz
Rack mounting	No
Ports quantity	The number of ports or external interfaces to which other equipment can be connected.
Frequency range	2.4 - 2.4835 GHz
Power supply type	DC/11W
Dimensions (WxDxH)	226 x 159 x 47 mm
USB connector type	USB Type-A
WLAN data transfer rates supported	300 Mbit/s
Cables included	LAN (RJ-45), Phone (RJ-11)
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Firewall security	IPv6
Security algorithms	128-bit WEP, 64-bit WEP, WPA, WPA2
Power supply	11 W
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	8 W
Product color	Red

Weight and Dimensions

Depth	159 mm
Width	226 mm
Height	47 mm
Weight	- g