AVM FRITZ!Box 7360 User Manual

20
Connecting to the Internet
Connecting to a DSL or VDSL Line with Fixed Line
Connecting to the DSL splitter
If you have a DSL or VDSL line and a line to the fixed-line tele-
phone network, then connect the FRITZ!Box as follows:
1. Connect the long, gray end of the DSL/telephone cable
to the socket on the FRITZ!Box labeled “DSL/TEL”.
2. Connect the short end of the cable to the DSL socket of
the DSL splitter.
The “Power / DSL” LED lights up after a short time to signalize
that the FRITZ!Box is ready for Internet connections.
Connecting to a Cable Connection
With an additional cable modem you can also use your
FRITZ!Box 7360 on a cable connection. Use a network cable.
1. Connect the free end of the network cable to the LAN
(Ethernet) port on the cable modem.
2. Connect the other end of the network cable to the socket
on FRITZ!Box labeled “LAN 1”.
3. Connect a computer with the FRITZ!Box either wirelessly
via WLAN or using a network cable (see page 23).
4. Set up the Internet connection for connections via cable
in the FRITZ!Box (see page 36).
INFO
WLAN
Festnetz
Internet
Power
/
DSL
Info
WLAN
Power
/
D SL
Fixed Line
Internet
FRITZ!Box_7360-en.fm Seite 20 Mittwoch, 15. Februar 2012 5:21 17

AVM FRITZ!Box 7360 Specifications

General

Plug and Play	Yes
Internal memory	512 MB
RJ-11 ports quantity	2
Ethernet LAN (RJ-45) ports	4
Bandwidth	2.4 GHz
Rack mounting	No
Ports quantity	The number of ports or external interfaces to which other equipment can be connected.
Frequency range	2.4 - 2.4835 GHz
Power supply type	DC/11W
Dimensions (WxDxH)	226 x 159 x 47 mm
USB connector type	USB Type-A
WLAN data transfer rates supported	300 Mbit/s
Cables included	LAN (RJ-45), Phone (RJ-11)
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Firewall security	IPv6
Security algorithms	128-bit WEP, 64-bit WEP, WPA, WPA2
Power supply	11 W
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	8 W
Product color	Red

Weight and Dimensions

Depth	159 mm
Width	226 mm
Height	47 mm
Weight	- g