80
Enabling the Baby Monitor
Enabling Baby Monitor
N Pick up the handset or activate the speaker
phone function of your telephone.
We recommend using a device with a speaker
phone function.
s4
<level>
s
<number>
r
Enables the baby monitor.
<Level>: Sound level at which a call is triggered.
Enter a numeral between 1 (the most sensitive
setting) and 8.
<Number>: The telephone number to be called.
Enter an internal telephone number (see
page 81), the number 9 for an internal group
call, or any external telephone number desired.
Q Wait for the second-long acknowledgement
tone.
Do not hang up the handset!
The baby monitoring function is now enabled.
As soon as the volume in the room reaches the
specified level, the telephone will dial the tele-
phone number you entered. If you accept the
call, you are connected with the telephone
where the baby monitor is enabled.
A new call is initiated no less than one minute
after the previous call.
You can disable the baby monitor at any time by
hanging up the headset.
Telephones on which baby monitoring is enabled can be
called internally (see page 81) so that you can listen in on
the room.
FRITZ!Box_7360-en.fm Seite 80 Mittwoch, 15. Februar 2012 5:21 17
To Next Page
Loading...
Need help?
General
Weight and Dimensions
