30 HMX Extender System Installer/User Guide
To change the OSD Timeout:
1. Press Print Screen and select the CFG tab.
Figure 3.6: Configuration Menu (OSD Timeout and Auto Logout)
2. Enter the desired amount of time for the OSD to be displayed.
3. Click Apply to save the changes.
Setting the Auto Logout time-out
If there is no keyboard or mouse activity for an amount of time greater than the value set in the
Auto Logout time-out, the user station will automatically disconnect from the transmitter and log
off from the HMX Manager.
To change the Auto Logout time-out:
1. Press Print Screen and select the CFG tab (see Figure 3.6).
2. Enter the desired amount of time for the Auto Logout time-out.
3. Click Apply to save the changes.
Inititating a remote connection (Matrix Mode)
To initiate a connection with a remote computer in Matrix Mode:
1. Press Print Screen.
2. Enter the Login Name and Password, ensuring that the appropriate keyboard has been selected.
3. Click the OK button to accept the changes.
4. In Matrix Mode, the Target window displays.
5. Select the remote computer to which you wish to connect and click Connect.
To Next Page
Loading...
Need help?
General
