Name: Avocent HMX
Brand: Avocent
Rating: 4 (1 reviews)

To Next Page

To Previous Page

42 HMX Extender System Installer/User Guide

4. Press 2 to select Transmitter IP Config and press Enter. The Transmitter IP Config menu will

appear. The old Transmitter IP Address is displayed beside menu option 1

Figure 3.21: Transmitter IP Configuration Menu on the HMX User Station

NOTE: This screen is available only in Extender Mode.

5. Press 3 to select Detect Transmitter Address and press Enter.

6. Turn on the transmitter.

7. The HMX user station will detect and save the IP address of the connected transmitter. The

Transmitter IP Configuration Menu will refresh, and the current IP address of the connected

Transmitter will be displayed beside menu option 1.

8. To save your changes and exit the menu, type 0 (zero) and press Enter.

Authentication

Authentication for the HMX user station

You can change the password settings for the HMX user station through the serial menu via the

Receiver Security Configuration Menu.

To access the Receiver Security Configuration Menu:

1. Press Enter to display the serial menu. The Appliance Selection Menu will be displayed.

2. Press 1 to access the Receiver Main Menu and press Enter. If the password option is enabled,

you will be prompted for a password.

Questions and Answers:

Need help?

Do you have a question about the Avocent HMX and is the answer not in the manual?

Avocent HMX Specifications

General