Chapter 3: Operations 31
NOTE: Once a remote computer has been selected, Matrix Mode denies access to any other user.
Access through Auto-Login Mode
Using the HMX Manager, an administrator can enable Auto-Login Mode. Once this step is
complete, the HMX user station is reset by the HMX Manager and it attempts to connect to the
specified transmitter. A login progress message will be seen at this point.
NOTE: The OSD will clear after a defined period of inactivity. To reactivate the OSD, enter a valid hotkey
sequence.
To display system information in Extender Mode:
1. Press Print Screen. In Extender Mode, the Info tab displays user information for your HMX
user station by default.
Figure 3.7: HMX User Station Connected to Transmitter
2. Click the Rcvr radio button to view system information for your HMX user station.
-or-
Click the Trans radio button to view the system information for your transmitter.
NOTE: If there is no transmitter connected, the Trans radio button option will display as No Target.
To Next Page
Loading...
