54 HMX Extender System Installer/User Guide
2. Press 1 to access the Receiver Main menu and press Enter. If the password option is enabled,
you will be prompted for a password.
3. Press 8 to access the Console Settings Menu and press Enter.
4. Press 1 to access the Session Retry Menu and press Enter.
Figure 3.33: Session Retry Menu
To change the retry settings:
1. Access the Session Retry Menu via the serial menu as described above.
2. To change the time interval between retry attempts, press 1 to choose the Session Retry
Timeout Seconds option and press
Enter. You will be prompted to enter a new time-out value
in SS (seconds) format.
3. Type a value between 1 and 60 (inclusive) and press Enter.
4. To confirm your selection and exit the screen, type 0 (zero) and press Enter.
Configuring the OSD Hotkey Sequence
To change the hotkey sequence that activates your OSD:
1. From the serial menu, press 1 to access the Receiver Main Menu and press Enter. If the
password option is enabled, you will be prompted for a password.
2. Press 8 to access the Console Settings Menu. The Console Settings Menu will appear. Your
currently selected OSD hotkey sequence is displayed beside menu item 1.
To Next Page
Loading...
Need help?
General
