Chapter 3: Operations 49
4. Press 1 and Enter to access the Receiver Reset menu to initiate the reset. A message will be
displayed on the serial menu that states Resetting appliance. During reset, the connection to the
transmitter is dropped. When the reset is complete, you will be automatically returned to the
Appliance Selection Menu. The connection to the transmitter will be automatically restored.
To reset the transmitter:
1. Press Enter to display the serial menu.
2. Press 2 to access the Transmitter Main Menu and press Enter. If the password option is
enabled, you will be prompted for a password. The Transmitter Main Menu will appear.
3. Press 5 to access the Reset Appliance menu and press Enter. The Reset Appliance Menu will
appear.
4. Press 1 and Enter to access Receiver Reset Menu to initiate the reset. A message will be
displayed on the serial menu that states Resetting appliance. During reset, the transmitter will
drop the connection to the user station. A second system message will appear that states:
Connection to the Transmitter is lost. You will be automatically returned to the Appliance
Selection Menu. The connection will be automatically restored.
Viewing System Information
The serial menu enables you to display the firmware release and details of the HMX user station
and of the transmitter.
To view HMX user station system information:
1. From the serial menu, press 1 to access the Receiver Main Menu and press Enter. If the
password option is enabled, you will be prompted for a password.
2. Press 7 to access the Appliance Information menu and press Enter.
Figure 3.27: Appliance Information Menu
3. Press 1 to access the Receiver Appliance Information Menu and press Enter.
NOTE: The term “receiver appliance” is used interchangeably with “user station.”
To Next Page
Loading...
Need help?
General
