48 HMX Extender System Installer/User Guide
Restoring Factory Default Settings
The serial menu enables you to easily restore the factory default settings of both the HMX user
station and the transmitter.
NOTE: Restoring factory default settings will also reset network settings. Before restoring factory default
settings, assess whether this is likely to cause conflicts with other devices on the network.
To restore the HMX user station or transmitter factory default settings:
1. From the serial menu, press 1 to access the Receiver Main Menu or press 2 to access the
Transmitter Main Menu and press
Enter. If the password option is enabled, you will be
prompted for a password.
2. Type the password and press Enter. The Receiver or Transmitter Main Menu will appear.
3. Press 4 to access the Restore Factory Defaults menu and press Enter.
4. Defaults will now automatically reset. You will be automatically returned to the Appliance
Selection Menu.
5. During reset, the HMX user station will drop the connection to the transmitter. When reset is
complete, the HMX user station will restore the connection to the transmitter using the new
settings.
Resetting the HMX System
To reset the HMX user station:
1. From the serial menu, press 1 to access the Receiver Main Menu and press Enter. If the
password option is enabled, you will be prompted for a password.
2. The Receiver Main Menu will appear.
3. Press 5 to access the Reset Appliance Menu and press Enter.
Figure 3.26: Receiver Reset Appliance Menu
To Next Page
Loading...
Need help?
General
