58 HMX Extender System Installer/User Guide
3. Press 3 to access the Audio Performance Menu and press Enter. The Audio Performance Menu
shows you the audio settings that you can choose from. The current setting is indicated by an
asterisk symbol (*).
Figure 3.38: Transmitter Audio Performance Menu
4. Type the number that corresponds to the audio setting you wish to apply and press Enter.
5. To confirm your selection and exit the screen, type 0 (zero) and press Enter. The unit resets
after you press
Enter.
To change the audio performance setting for the HMX user station:
1. From the serial menu, press 1 to access the Receiver Main Menu and press Enter. If the
password option is enabled, you will be prompted for a password.
2. Press 8 to access the Console Settings Menu and press Enter. The current audio performance
setting is displayed beside menu item 4.
3. Press 4 to access the Audio Performance Menu and press Enter. This menu shows you the
audio settings that you can choose from. The current setting is indicated by an asterisk.
Figure 3.39: Receiver Audio Performance Menu
To Next Page
Loading...
