Avocent PM 3000 User Manual

18 Avocent PM PDU Installer/User Guide
To view a PDU’s information:
1. Select Power
Management - PDUs.
2. Click the name of the PDU you want to view or manage.
3. The Outlet Table with power controls window appears and the Side Navigation Bar displays a
list of
options.
4. To manage outlets of PDU:
a. Check the box(es) of the outlet number(s) you want to manage.
b. Click On, Off,
Cycle, Lock or Unlock to perform that function for the selected outlet(s).
5. Click Info
rmation in the Side Navigation Bar to view a PDU’s information.
6. Click Overview
, Current, Voltage, Power Consumption, Cumulative Power or Environment in
the Side Navigation Bar to view a table with appropriate information.
7. To reset values, check the box next to the outlet you want to reset and click Rese
t Values to
clear Max, Min and Average values.
To manage outlets on a PDU:
1. Select Power
Management - PDUs and click on the name of the PDU you want to manage.
2. Click Settings to expan
d the Side Navigation Bar.
3. Click Out
lets.
4. Click on an outlet number to change its settings. You can change the Name, Post On Delay,
Post O
ff Delay, Current Critical Threshold, Current Warning Threshold and Current Low
Warning Threshold.Click Save, then click Close.
-or-
Check two or more boxes next to the outlets for which you want to change settings. Click Edit.
You can change the Prefix Name (t
he outlet name will be the Prefix Name with an underscore
and the outlet number), Post On Delay, Post Off Delay, Current Critical Threshold, Current
Warning Threshold and Current Low Warning Threshold. Click Save.
5. Click PDU to see
PDU settings. You can configure Cold Start Delay and Current Threshold(s).
Click Save when finished.
6. Click Phases or Ba
nks.
a. Click on the name of a phase or bank to change its settings, or click one or more boxes
next
to the phase(s) or bank(s) you want to change. You can change the Current Critical
Threshold, Current Warning Threshold and Current Low Warning Threshold.
b. Click Save to save the set
tings and click Close to return to the Phases or Banks screen.
7. Click Envi
ronment.
a. Click on the name of a sensor to change its set
tings. You can configure a sensor’s name
and its thresholds. Click Save.

Avocent PM 3000 Specifications

General

Brand	Avocent
Model	PM 3000
Category	AC Power Distribution
Language	English