Chapter 3: Accessing the PM PDU via the Web Manager 37
4. If you want an event notification sent for any configured event destination type, click its
associated Send checkbox.
5. Click Save. Th
e Events page appears with an X in the column below the destination type if the
Send box was checked on the Events Settings screen.
Event Destinations
To configure Event Destinations:
1. Click on Event and
Logs - Event Destinations.
2. Under the Syslog heading, use the drop-down menu to select the Facility.
3. Select Remote Server - IPv4 to enabl
e syslog messages to be sent to one or more remote IPv4
syslog servers, and enter the IPv4 Address or Hostname. Separate multiple server addresses by
commas.
-or-
Select Remote Server - IPv6 to enabl
e syslog messages to be sent to one or more remote IPv6
syslog servers, and enter the IPv6 Address or Hostname. Separate multiple server address by
commas.
4. Select Appli
ance Console to send messages to the PM PDU’s console.
5. Select Root Session
to send syslog messages to all sessions where you are logged in as root
user.
6. Under the SNMP Trap heading, enter the name of the community defined in one or more of the
SNMP trap servers in
the Community field then enter the IP addresses of up to five servers in
the server fields.
7. Under the SMS heading, enter the SMS Server, Port and Pager Number
information in the
appropriate fields.
8. Under the Email heading, enter the Server
, Port and Destination Email information in the
appropriate fields.
9. Under the DSView 3 heading, enter the IP address of
the DSView 3 server where event
notifications will be sent in the DSView 3 server field. Enter the syslog server port number for
the DSView 3 server, the SSH information and the buffer warning information in the
appropiate fields.
10. Click Sa
ve.
Data Buffering
To configure Data Buffering:
1. Select Events
and Logs - Data Buffering.
2. Enter the segment size in kilobytes and spare segments
in the Local Data Buffering Settings
section.
To Next Page
Loading...
Need help?
General
