30 Avocent PM PDU Installer/User Guide
4. Enter your secret word or passphrase in the Secret field (applies to both first and second
authentication and accounting servers), then re-enter the secret word or passphrase in the
Confirm Secret field.
5. Enter the desired number of seconds for server time-out in the Timeout field.
6. Enter the desired number of retries in the Retries field.
7. If you select the Enable Service-T
ype attribute to specify the authorization group checkbox,
enter the authorization group name for each of the following Service Types: Login, Framed,
Callback Login, Callback Framed, Outbound and Administrative.
8. Click Save.
T
o configure a TACACS+ authentication server:
1. Select Authen
tication - Authentication Servers - TACACS+.
2. Enter the IP addresses for the First Authentication Server and First Accounting Server
.
3. If used, enter the IP addresses of the Second Authentication Server an
d Second Accounting
Server.
4. Select the desired service (PPP or raccess)
from the Service drop-down menu.
5. Enter your secret word or passphrase in the Secret
field (applies to both first and second
authentication and accounting servers), then re-enter the secret word or passphrase in the
Confirm Secret field.
6. Enter the desired number of seconds for server time-out in the Timeout field.
7. Enter the desired number of retries in the Retries field.
8. If you select the Enable User-Level attribute of Shell and
raccess services to specify the
authorization group checkbox, enter the authorization group name for up to 15 User-Levels.
9. Click Save.
T
o configure an LDAP(S)|AD authentication server:
1. Select Authen
tication - Authentication Servers - LDAP(S)|AD.
2. Enter the IP address of the server.
3. Enter the Base.
4. At the Secure drop-down menu, select Off, On or St
art_TLS.
5. Enter the Database User Name.
6. Enter your Database Password, then re-type the d
atabase password in the Confirm Password
field.
7. Enter your desired Login Attributes.
8. Click Save.
T
o configure a Kerberos authentication server:
1. Select Authen
tication - Authentication Servers - Kerberos.