60 Avocent PM PDU Installer/User Guide
alias =
--:#- [hosts] cli->
4. Enter set hostname=<hostname> ip=<IP_address> to add the name of a host and the IP
address for the host.
NOTE: Each parameter that follows the add command is separated by a space.
--:#- [hosts] cli-> set hostname=sharedpmpdu ip=172.26.31.164
5. Enter save
--:#- [hosts] cli-> save
6. Enter show to verify the changes took place and to view the new host entry.
--:- hosts cli-> show
ip hostname alias
===== ======== =====
127.0.0.1 localhost
127.26.31.164 sharedpmpdu
7. Enter cd <IP_address>/settings to navigate to the level where you can perform additional
configuration of the host entry.
--:- hosts cli-> cd 172.26.31.164/settings
8. Enter show to view the additions to the host table and the Settings option.
ip hostname alias
===== ======== =====
127.26.31.164 sharedpmpdu
To Next Page
Loading...