MAIN MENU
28
287
6) ADVANCED CONFIG
The advanced settings are available only when the connected camera supports.
Video Analytics
The options within this function should work with CMS PRO to take effects. For details, please check with your
installer or distributor.
PRIVACY MASK
SCENE CHANGE OFF
DEFOCUS OFF
ENABLE OBJECT DETECTION OFF
ENABLE FACE DETECTION OFF
APPLY
Privacy mask
You can cover certain areas on the camera image with privacy masks. Up to 20 areas could be added.
PRIVACY MASK
MOSAIC SIZE 8x8
PRIORITY OVERLAY
NAME FUNCTION MOSAIC COLOR COLOR FOR MASK TRANSPARENCY
MASK1 OFF OFF ON 0%
MASK2 ON ON ON 25%
ADD EDIT DEL
Select ADD to add a new setting, EDIT to modify an existing setting, and DEL to remove a setting.
PRIVACY MASK - EDIT
NAME MASK3
FUNCTION ON
MOSAIC ON
COLOR ON
COLOR FOR MASK
TRANSPARENCY 50%
LINE WIDTH 0
MASK AREA SETUP
Item Description
MOSAIC SIZE Choose the mosaic size of the privacy mask. The options are: 8×8, 32×32, and 64×64.
NAME Name your privacy mask.
FUNCTION Select “On” to enable the privacy mask function.
MOSAIC Select “ON” to have the mosaic effect.
COLOR Select “ON” to color the privacy mask. In the meantime, you can’t see the mosaic effect.
COLOR FOR MASK Select the color for the privacy mask.
TRANSPARENCY Select the transparency for your privacy mask. The options are: 0%, 25%, 50%, and 100%.
When 100% is chosen, no color is shown but only the mosaic effect for the mask area.
LINE WIDTH Select if you want to know where the mask area is especially when the transparency is set to
100%. This function will add a border for the mask area. The options are: 0, 2, 4 and 6.
When 0 is chosen, no border is added.
MASK AREA Select “SETUP” to enter the area selection page. To exit, right click.
To Next Page
Loading...
