MAIN MENU
29
297
ROI (Region of Interest)
ROI is used to reinforce the image quality of the selected area(s). Users could specify two areas in the camera view.
REGION OF INTEREST
REGION ENABLE QUALITY
1 ON 7
2 OFF 7
EDIT
Select REGION 1 or REGION 2, and choose EDIT to change the setting.
REGION OF INTEREST – EDIT
ENABLE ON
QUALITY
AREA SETUP
APPLY
Camera Guard
This function is used to lock the camera to a fixed point and no pan action could be made until the lock mode is
disabled. Before using this function, make sure:
1. You’ve configured at least one preset point and one preset group for the connected camera.
2. You have an iOS or android mobile device with our free app, EagleEyes, installed.
3. Your recorder is connected to Internet, and registered in the address book of EagleEyes.
CAMERA GUARD – CH1
GUARD LOCK ON
TIMEOUT (SECS) 30
PRESET GROUP 1
PRESET NUMBER 1
APPLY
Item Description
GUARD LOCK Enable (ON) or disable (OFF) this function.
TIMEOUT (SECS) Configure the timeout in seconds (30 / 60 / 90 / 120) after which the camera will be fixed to the
current point and any attempt to pan the camera to another point will be failed.
PRESET GROUP Choose the group where the point you’d like to use is configured, and go to PRESET NUMBER
to choose the preset point number.
PRESET NUMBER Choose the preset point number you’d like to use when GUARD LOCK is enabled.
To Next Page
Loading...
