MAIN MENU
53
537
EVENT MONITOR is used when any alarm event occurs. When this option is selected, go to
LAYOUT to select how many channels you want to see, and PRE-ALARM (SEC) and
POST-ALARM (SEC) to set how many seconds you’d like to see before (0 ~ 5) and after (3 ~ 10)
the event starts.
COMPOSITE OUTPUT
FORMAT NTSC
FUNCTION EVENT MONITOR
LAYOUT 4
PRE-ALARM (SEC) 3
POST-ALARM (SEC) 5
LIVE is used to select how many channels you’d like to show on the spot monitor.
HDMI2 DISPLAY
FORMAT NTSC
FUNCTION LIVE
PROFILE 1
LAYOUT 4
CH1 CH3
CH5
CH8
10) VGA OUTPUT (For selected models only)
Choose MAIN MONITOR or SPOT MONITOR for how the VGA port is used for video output. When
SPOT MONITOR is chosen, go to SPOT MONITOR to choose how you’d like the monitor to display the
video.
11) CALL SCREEN DURATION
Select the duration time in second (03 / 05 / 10 / 15) when the channel display mode is 1-cut and
(Sequence) is selected.
12) QUAD SCREEN DURATION
Select the duration time in second (03 / 05 / 10 / 15) when the channel display mode is 4-cut and
(Sequence) is selected.
13) NVR MODE (For selected models only)
The recorder can be used as a 9CH or 16CH recorder. When it’s used as a 9CH recorder, the live display
supports 4K2K resolution; when it’s used as a 16CH recorder, the live display supports only 1080P resolution
even when a 5MP camera is connected.
To Next Page
Loading...
