MAIN MENU
52
527
EVENT MONITOR is used when any alarm event occurs. When this option is selected, go to
LAYOUT to select how many channels you want to see, and PRE-ALARM (SEC) and
POST-ALARM (SEC) to set how many seconds you’d like to see before (0 ~ 5) and after (3 ~ 10)
the event starts.
SPOT MONITOR
FUNCTION EVENT MONITOR
LAYOUT 4
PRE-ALARM (SEC) 3
POST-ALARM (SEC) 5
LIVE is used to select how many channels you’d like to show on the spot monitor.
SPOT MONITOR
FUNCTION LIVE
PROFILE 1
LAYOUT 4
CH1 CH3
CH5
CH8
9) COMPOSITE OUTPUT (For selected models only)
Specify how the composite port is used for video output: CALL MONITOR / EVENT MONITOR / LIVE.
CALL MONITOR is used for sequence display. When this option is selected, go to CALL SCREEN
DURATION to select the duration time in second (03 / 05 / 10 / 15) and CALL MONITOR
PERMIT to choose the channel(s) you want for sequence display.
COMPOSITE OUTPUT
FORMAT NTSC
FUNCTION CALL MONITOR
CALL SCREEN DURATION 5
CALL MONITOR PERMIT 4 selected
To Next Page
Loading...
