Axel Oxygen 5 Operating Manual

Oxygen 5
Pag. 19
4.1 SEND OUTPUT
The Send output allows to send to the telephone line - through an external phone hybrid
(e.g. MACROTEL7 by AXEL Technology) - the signal composed by the sum of the output
signals from every module except the Telco one.
Send output (mono) is electronically balanced on female a Jack with 0 dB gain.
The pin-out presents standard configuration:
• Sleeve  Ground
• Tip  Signal
• Ring  Return
We suggest to use balanced links. See Appendix A for wire connection schemes.
4.2 RECEIVE INPUT
The input RECEIVE allows to receive, through an external phone hybrid (e.g.
MACROTEL7 by AXEL Technology) a phone signal incoming from the telephone line.
Receive input (mono) is electronically balanced on female a Jack with 0 dB gain.
The pin-out presents standard configuration:
• Sleeve  Ground
• Tip  Signal
• Ring  Return
We suggest to use balanced links. See Appendix A for wire connection schemes.
4.3 REMOTE INTERFACE
Remote interface is based on DB 9p female connector.
Module facilities and functions settings are:
REMOTE MUTING
The Mute remote mode allows the remote Muting of the module (outputs toward Master
bus). You just need to feed the pin 7 of the interface with +6V voltage.
HOOK – RING FACILITIES
Hook button contact is available on pins 4-5 (optoisolated contact). The signalling of
incoming call can be brought to the ‘Ring’ led near the Hook button through the 8-9 pins.
On request, Axel Technology supplies a special cable to remote Macrotel telephone hybrid
from the console.
Pin-out SUB D 9P female:
Pin 1 GND
Pin 2 N.C.
Pin 3 N.C.
Pin 4
Emitter of the photocoupled transistor for
HOOK function
Pin 5 Collector of the photocoupled transistor for
HOOK function
Pin 6 supplies + 6V
Pin 7
enables the MUTE function if you supply
+ 6 V
Pin 8 Ring Led cathode
Pin 9 Ring Led anode

Axel Oxygen 5 Specifications

General

Brand	Axel
Model	Oxygen 5
Category	Music Mixer
Language	English