Axis AGN50 - Page 55

INSTRUKCJA OBSŁUGI 55
____________________________________________________________________________________________________________________
Select Activate with cursor and Press
ENTER.
Press  T  to taring scale
Suspend the plunger (measurement in
the air) and press Enter. Please not
immerse plunger in the liquid on this
stage.
Suspend the plunger and immerse in
beaker with examine liquid
(measurement in the liquid) and press
ENTER.
Result of measurement is displayed on
the screen (Liquid density).
Scale enumerated density with the
compensation of influence air density -
(Density with comp.), too.
Press F1 to printed a result.
Press F5 or ENTER to started next
measurement.
Press F3 to finished density
measurement.
Max ... Min ... e= ... d= .. II
ENTER 25.5462 g
0%
100%
Max ... Min ... e= ... d= .. II
ENTER 15.5482 g
0%
100%
USER FUNCTIONS / DENSITY
1.Activate
2.Material type : liquid
3.Plunger volume: 5.00000 cm3
4.Report printout
5.Exit
Max ... Min ... e= ... d= .. II
>T< 0.0000 g
0%
100%
RESULTS
Mass in the air : 25.5462g
Mass in the liquid : 15.5482g
Liquid density : 1.9848g/cm3
Density with comp. : 1.9839g/cm3
F1 PRINT F3 DONE F5 EXIT