Axis AGN50 - Solid Body Density Determination

52 INSTRUKCJA OBSŁUGI
____________________________________________________________________________________________________________________
14.21.1 Solid body density determination
Suspend the trays and tare scale
pressing button  T  .
Press button Menu, select Density
measurement with cursor and press
ENTER..
Select Material type with cursor and
press ENTER.. Use > and < keys to
choose solid material and press ENTER
Select Liquid type with cursor and press
ENTER.
When is used distilled water please use
> and < keys and select water. If is
used a different liquid - please choose
different, and press ENTER.
If is used distilled water please write
current temperature of water. This is
necessary to calculate a correct value of
density – require accuracy is 0,5 degree.
If is used a different liquid please write
accurate density value this liquid on the
present temperature.
Finish the procedure pressing ENTER.
USER FUNCTIONS
Autotaring
PCS counting
. . .
Density measurement
. . .
USER FUNCTIONS / DENSITY
1.Activate
2.Material type : solid
3.Liquid type : water 20.0
o
C
4.Liquid density : 0.99820g/cm3
5.Report printout
6.Exit
USER FUNCTIONS / DENSITY
1.Activate
2.Material type : solid
3.Liquid type : water 20.0
o
C
4.Liquid density : 0.99820g/cm3
5.Report printout
6.Exit
USER FUNCTIONS / DENSITY
1.Activate
2.Material type : solid
3.Liquid type : < water >
4.Liquid density : 0.99820g/cm3
5.Report printout
6.Exit
USER FUNCTIONS / DENSITY
1.Activate
2.Material type : solid
3.Liquid type : water T= 20.0
4.Liquid density : 0.99820g/cm3
5.Report printout
6.Exit