Axis AGN50 - Density Measurement Report

56 INSTRUKCJA OBSŁUGI
____________________________________________________________________________________________________________________
14.21.3 Density measurement report
To print the measurement results, connect the printer to RS232C connection of the
balance. The connection method is described in the instruction manual.
After each measurement the print may
be performed by pressing F1 key (it is
also possible to select Report print
option and press ENTER).
Print example:
Measurement number
=
Mass in the air
= g
Mass in the liquid
= g
Density …
= g/cm
3
Density with comp.
= g/ cm
3
Water density
= g/cm
3
Water temperature
=
o
C
USER FUNCTIONS / DENSITY
1.Activate
2.Material type : solid
3.Liquid type : water 20.0
o
C
4.Liquid density : 0.99820g/cm3
5.Report printout
6.Exit