Axminster PS315 User Manual

Code 101256
AT&M:16/11/2016
REF: 101882
PS315 1600mm
Panel Saw

Axminster PS315 Specifications

General

Blade Diameter	315 mm
Table Size	800 x 550 mm
Weight	52 kg
Bore Size	30 mm
Supply Voltage	230 V
Voltage	230V
Power	2000W
Motor Power	2000W

Summary

What's Included

General Instructions for 230V Machines

Good Working Practices/ Safety

Suggestions for good working practices, keeping safe, and maintaining tools.

Mains Powered Tools

Specific Safety Precautions

Specification

Initial Assembly

Main Saw Assembly

Steps for attaching guards and extraction moulding to the main saw frame.

Right Hand Extension Tables

Rip Fence Assembly

Assembling and attaching the rip fence control assembly and rail.

Sliding Table Assembly

Mounting the main sliding table assembly onto the saw frame.

Sliding Table Extension

Attaching the sliding table extension support arm and extension table.

Sliding Table Fence Assembly

Mounting and adjusting the fence for the sliding table, including the 90° stop.

Sliding Table Mitre Fence

Rear Extension Table

Crown Guard & Hose

Connecting the crown guard to the riving knife and attaching dust extraction hose.

Setting Up the Machine

Setting the Saw Blade at 90°

Aligning the saw blade perpendicular to the table using a square.

Setting the Saw Blade at 45°

Setting Scoring Blade

Extension Table Fence

Sliding Table Clearance

Sliding Table Height

Setting the Riving Knife Gap

Rip Fence

Operating Instructions

Operating Procedures

Dust Extraction

Rip Saw Cutting

Changing the Main Blade

Inspecting and Changing the Drive Belts

Routine Maintenance

Drive Belt Maintenance

Lubrication