Azbil 700 series - Page 136

B-6
UpdateShutCount
ShutCountThreshold
(Defaultvalue100000)
ShutCountAlarm
Enabled
MaxTravelSpeed
MaxTvlSpeed+
MaxTvlSpeed-
UpdateMaxTvlSpeed
ResetMaxTvlSpeed
MaxTvlSpeed
Threshold+
(Defaultvalue+1000%/
s)
MaxTvlSpeed
Threshold-
(Defaultvalue-1000%/
s)
MaxTvlSpeedAlarm
Enabled
TravelHistogram
TravelHistogram
TravelHistogram1
｜
TravelHistogram26
UpdateTravelHistogram
ResetTravelHistogram
TravelSegmentation
TravelSegDivider1
｜
TravelSegDivider25
Note 1: These parameters are updated when the auto setup is carried out.
Note 2: When '1.$', '<<<', '>>>' or '1.#INF' is displayed, the value is non-numeric
character or infinite.
Note 3: The order of 'MM/DD/YYYY' can be changed with the host or PC
configuration.
*1.Displayexceptfor"Linear"ofInputCharacterization
*2.Displayincaseof"DoubleActing"ofPilotRelayType
*4.DisplayincaseofParam1,23,4,5,or6ofActuatorSize
*5.Displayincaseof"Custom"ofActuatorSize
*6.Displayincaseof"Custom"or"GAP1 ≠ 0.00"ofActuatorSize
*7.Displayincaseof"Custom","GAP1 ≠ 0.00"or"GAP1 ≠ 0.00"ofActuator
Size
*8.Displayincaseof"CustomCurve"ofInputCharacterization
*10.Pleaseaskourserviceengineertocarryoutthisoperation.
*11.Displayincaseof"Enabled"ofPasswordUse
*12.DisplayincaseofAVP701
*13.DisplayincaseofonlyEDD
*14.DisplayincaseofonlyDD