2-4
<Example devices>
- Products from SMC Corporation
Mist Separator AM150 or AM250 Series
(Filtering level: 0.3 μm, Secondary oil mist concentration: 1.0 mg/m
3
)
- CKD Corporation
Oil mist filter
M1000 or M3000 Series
Mantle S Type (Filtering level: 0.3 μm, Remaining oil: 1.0 mg/m
3
)
Handling Precautions:
Select a compressed air purifier with specifications suited to the usage
conditions. Even when you install the above oil removal equipment, it is
necessary to properly inspect and maintain the air circuit section for long-term
stable operation. Install the oil removal equipment before use and perform
periodic inspection and maintenance.
The warranty is void if the device fails because the quality of the above
instrumentation air was not sufficient.
To Next Page
Loading...
