3-10
Step Work LUI display
4
Press the
button, select whether to adjust the
angle for 100% or 0% opening with the
and
buttons, and press the button. (Refer to
“(2) Procedure for adjusting the angle.”)
To manually adjust each opening rather than
using the opening adjustment function, select
manual adjustment for 100% opening (0%
opening) with the
and buttons and press
the
button. (Refer to “(3) Procedure for
manual adjustment.”)
(100% opening angle adjustment)
(0% opening angle adjustment)
(100% opening manual adjustment)
(0% opening manual adjustment)
(2) Procedure for adjusting the angle
Step Work LUI display
1
Select the angle (COARSE, MID, FINE) for 100%
opening adjustment (0% opening adjustment)
with the
and buttons and press the
button.
COARSE: Angle 1°
MID: Angle 0.1°
FINE: Angle 0.01°
( )
2
Adjust the angle by pressing the
button to
increase the opening and pressing the
button
to decrease the opening.
( )
3
Pressing the
button displays the current
opening and output air pressure (Pout1). Check
that the angle is properly adjusted.
If further adjustment is required, go back to the
adjustment screen with the
button.
( )
To Next Page
Loading...
