User’s Guide 1-6
3. Select CD-ROM drive, if it is not selected already.
4. Click Next and follow all remaining prompts to complete the installation. Click Finish when
prompted.
5. Restart the computer.
You have installed the Sky2PC driver and are now ready to install the software applications. See
“Installing Software Applications” on page 1-18.
Windows 2000
(PCI) When you insert your installation CD and start your computer for the first time after installing the
Sky2PC card, Windows 2000 displays a dialog that says it has detected a PCI Network Controller. This
is how the operating system identifies the digital receiver card.
(USB) When you insert your installation CD, connect the USB box to the PC and turn on the USB box
for the first time, Windows 2000 displays the Found New Hardware dialog. This dialog appears when-
ever unfamiliar hardware is detected.
1. Click Next.
To Next Page
Loading...