User’s Guide 1-8
5. (USB) Click Next and follow all remaining prompts until the Digital Signature Not Found dialog
appears:
Click Yes.
6. Follow all remaining prompts to complete the installation. Click Finish when prompted.
You have installed the Sky2PC driver and are now ready to install the software applications. See
“Installing Software Applications” on page 1-18.
Windows Me
(PCI) When you insert your installation CD and start your computer for the first time after installing the
Sky2PC card, Windows Me displays a dialog that says it has detected a PCI Network Controller. This is
how the operating system identifies the digital receiver card. Click Next and follow all prompts until the
dialog asks for the location of the driver.
(USB) When you insert your installation CD, connect the USB box to the PC and turn on the USB box
for the first time, Windows Me displays the Add New Hardware dialog. This dialog appears whenever
unfamiliar hardware is detected.
To Next Page
Loading...