User’s Guide 4-2
Satellite Settings
Use the Satellite Settings tab to configure your dish antenna, configure initial service, or to modify cur-
rent settings for satellites, transponders, programs, or data services.
Satellite List
The Satellite list on Setup4PC lists all receivable satellites. The Satellite list must be edited (or added
to) when antenna equipment is directed at a new satellite. Adding a satellite to the list configures an
antenna or LNB to receive services from the new satellite.
Before configuring Sky2PC to receive a channel from a new data or television transponder, make sure
the satellite is selected in the Satellite list. If the satellite for the new service is not listed, add it.
To view the Satellite list:
1. Launch Setup4PC.
Program Management Lists and manages the current satellite’s programs. Undesired programs can be
permanently deleted.
Data Services Manages data services such as Internet or multicast. Existing data service can be
modified or new service added.
Statistics Displays unicast and multicast data streams.
Options Settings for encryption, graphic cards, and restoring satellite database.
Status Monitors and controls the tuner for troubleshooting purposes. Performance sta-
tistics can be viewed.
Help Context-sensitive help.
To Next Page
Loading...