Section
1–3
MN1229
Safety Notice
This equipment contains high voltage. Electrical shock can cause serious or
fatal injury. Only qualified personnel should attempt the start-up procedure or
troubleshoot this equipment.
This equipment may be connected to other machines that have rotating parts or
parts that are driven by this equipment. Improper use can cause serious or
fatal injury. Only qualified personnel should attempt the start-up procedure or
troubleshoot this equipment.
PRECAUTIONS
WARNING: Do not touch any circuit board, power device or electrical
connection before you first ensure that power has been
disconnected and there is no high voltage present from
this equipment or other equipment to which it is
connected. Electrical shock can cause serious or fatal
injury. Only qualified personnel should attempt the
start-up procedure or troubleshoot this equipment.
WARNING: Be sure that you are completely familiar with the safe
operation of this equipment. This equipment may be
connected to other machines that have rotating parts or
parts that are controlled by this equipment. Improper use
can cause serious or fatal injury. Only qualified personnel
should attempt the start-up procedure or troubleshoot this
equipment.
WARNING: Be sure all wiring complies with the National Electrical
Code and all regional and local codes. Improper wiring
may result in unsafe conditions.
WARNING: Be sure the system is properly grounded before applying
power. Do not apply AC power before you ensure that all
grounding instructions have been followed. Electrical
shock can cause serious or fatal injury.
Safety Notice
This equipment contains high voltage. Electrical shock can cause serious or
fatal injury. Only qualified personnel should attempt the start-up procedure or
troubleshoot this equipment.
This equipment may be connected to other machines that have rotating parts or
parts that are driven by this equipment. Improper use can cause serious or
fatal injury. Only qualified personnel should attempt the start-up procedure or
troubleshoot this equipment.
PRECAUTIONS
• WARNING: Do not touch any circuit board, power device or electrical
connection before you first ensure that power has been
disconnected and there is no high voltage present from
this equipment or other equipment to which it is
connected. Electrical shock can cause serious or fatal
injury. Only qualified personnel should attempt the
start-up procedure or troubleshoot this equipment.
• WARNING: Be sure that you are completely familiar with the safe
operation of this equipment. This equipment may be
connected to other machines that have rotating parts or
parts that are controlled by this equipment. Improper use
can cause serious or fatal injury. Only qualified personnel
should attempt the start-up procedure or troubleshoot this
equipment.
• WARNING: Be sure all wiring complies with the National Electrical
Code and all regional and local codes. Improper wiring
may result in unsafe conditions.
• WARNING: Be sure the system is properly grounded before applying
power. Do not apply AC power before you ensure that all
grounding instructions have been followed. Electrical
shock can cause serious or fatal injury.
MN1229
1-3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
