5-12 Operation
MN1276
Main Menu Choice Descriptions
File
Open a new editor window.
Open an existing editor window.
Close the active editor window.
Close all editor windows.
Save the active editor window to a file.
Save the active editor window to a new file name .
Save all editor windows.
Print the contents of the active editor window.
Exit and close the Set up software.
Edit
Cut the selected text in the active editor window to the clipboard.
Copy the selected text in the ac tive editor window to the clipboard.
Paste text from the clipboard at the cursor location in the active editor window.
Erase the contents of the active window.
Select everything in the active window.
Save the active editor window to a new file name .
Setup
Allows selection of the motor being used.
Allows selection of Current, Velocity or Positioning modes.
Allows PC to read the control configuration and save the parameters to a file.
Allows PC to read a configuration file and download parameters to the control.
Save the contents of the motion buffer to a file.
Restore a motion buffer file and downloads the parameters to the control.
Select a control for communication (8 maximum in daisy chain).
Not available for this control.
Not available for this control.
Set CW and CCW inputs to MAI3 and MAI4 respectively.
To Next Page
Loading...
