Baldor FPX A05T - Specifications & Product Data

Section 7
Specifications & Product Data
Specifications & Product Data 7-1MN1276
Identification
Flex +Drive
FP
-- R
Enclosure Type
T= Panel Mount w/internal power supply
P= Panel Mount w/external power supply
S = Panel Mount w/internal power supply
(suitable for sharing with other controls).
Servo Control
C
X
Input Voltage
1=115VAC
2=230VAC
4=460/400VAC
A
X
X
Current Rating
A02=2/2.5Amps
A05=5Amps
A07 = 7.5 Amps
A10 = 10 Amps
A15 = 15 Amps
A20 = 20 Amps
A27 = 27.5 Amps
X
X
Braking (Option)
R = Requires external regen resistor
B = Built-in regen resistor
O = No internal regen capability
3
4
Logic Supply (Option)
0 = Internal 24VDC Supply
3 = External customer provided
24VDC required
Serial Port Type (Option)
2 = RS232
4 = RS485
Bus (Option)
N = None
C= CAN Bus
*
Feedback Device (Option)
R= Resolver
E= Encoder
* CAN Bus is only available for controls with
resolver feedback. Controls that have encoder
feedback may not have CAN Bus.