Bante Instruments 221 - Data Management; Storing a Measurement Result; Viewing the Data Logs

39 I Data Management
Data Management
This section is applicable to all models of meters
Data Management
The meter is capable of storing and recalling up to 500 data sets.
Storing a Measurement Result
During the measurement, press the MI key to store the reading into
the memory, the Memory icon appears on the display.
Viewing the Data Logs
1.1 Press the MR key in the measurement mode, the meter shows
/ (Log/Page 1).
1.2 Press the Enter key, the meter shows the serial number of stored
data.
1.3 Press the  key to view the date and time of measurement.
Serial number