BARCO MXRT control panel settings
12
Wait for Vertical Sync:
• For OpenGL the default setting is Default Off.
• For Direct3D the defaul setting is Application Preference.
Please refer to the on-line help for more information on using advanced
features such as Wait for Vertical Sync.
Mipmap detail level
Mipmapping is a texturing technique that preserves the detail on a 3D
object’s surface as it moves into the background. A series of high- and
low-resolution texture maps are stored in memory and selectively used
to create the object’s surface, depending on what level of detail is
needed.
Please refer to the on-line help for more information on using advanced
features such as Mipmap Detail Level.
Device details
The Device Details page provides detailed information about the display
controller connected to the active display. This information is useful in
debugging issues that may occur when using your B
ARCO CORONIS
Display(s).
Configuration
The Configuration page enables you to customize display profiles for
individual applications. Typically, you would change these settings for
one or more of the following reasons:
• Diagnostic purposes.
• Fine-tuning a specific application/system configuration.
• Specific settings recommended by your hardware or software
documentation.
• Tuning your application/system environment for best
performance and memory usage.
To Next Page
Loading...
Need help?
General