Barco Coronis User Manual

BARCOMED CORONIS Display properties
20
Vendor ID: Displays the device manufacturer’s PCI Vendor ID
number.
Subsystem ID: Displays the device’s PCI Subsystem ID number.
SubsystemVendorID: Displays the device’s PCI Subsystem Vendor ID
number.
VGA Status: Displays whether the VGA capabilities of the BarcoMed
controller are enabled or disabled.
Firmware Information
Product Name: Displays the name of the BarcoMed display
controller installed in the selected PCI slot.
Serial Number: Displays the serial number of the BarcoMed display
controller installed in the selected PCI slot.
VGA Bios Version: Displays the VGA Bios version for the BarcoMed
display controller installed in the selected PCI slot.
Firmware Version: Displays the firmware version for the BarcoMed
display controller installed in the selected PCI slot.
Hardware Version: Displays the Hardware Version for the BarcoMed
display controller installed in the selected PCI slot.
“Advanced ...” Button: By clicking on this button, the user can
display more information about the BarcoMed display controller
installed in the selected PCI slot.
Utilities
“Generate Report” Button: The Barco System Report, also known as
BarcoMed SelfExam Report, is a wizard based tool which collects
data about the components that are installed in your system. This
information is used by the Barco MIS Support team when trying to
resolve customer issues.
Update Device... Button: Clicking this button will launch the
BarcoMed Hardware Configuration utility. This program allows the
user to flash update the firmware stored in the ROM of the

Barco Coronis Specifications

General

Brand	Barco
Model	Coronis
Category	Monitor
Language	English