Barco Coronis User Manual

On-screen display (OSD)
50
3. Use the Up or Down touch keys to select the Luminance
menu. Use Enter
to open the menu.
4. Use Up
or Down to select Luminance Target. Use Enter to
go into edit mode.
5. Use Up
or Down to adjust the luminance target.
6. Use Enter
to save the changes.
Color target (color displays)
Selecting a color target
To select a color target:
1. Touch any of the soft touch keys.
The front illumination is switched on.
2. While the illumination is on, touch the Enter
touch key to
display the main menu.
3. Use the Up
or Down touch keys to select the Luminance and
Color menu. Use Enter
to open the menu.
4. Use Up
or Down to select Color Target. Use Enter to go
into edit mode.
5. Use Up
or Down to select the desired color target.
6. Use Enter
to save the changes.
You can select the following color targets:
Name Description
Clearbase Simulation of the clearbase film
color temperature
Bluebase Simulation of the bluebase film
color temperature

Barco Coronis Specifications

General

Brand	Barco
Model	Coronis
Category	Monitor
Language	English