On-screen display (OSD)
51
Color target definition
Note:
For the Native White color target, only the luminance target can be
modified. For Clearbase and Bluebase the luminance target and color
temperature in (x,y) co-ordinates can be modified. The User color target
can be modified completely.
To modify the color target definition:
1. Touch any of the soft touch keys.
The front illumination is switched on.
2. While the illumination is on, touch the Enter
touch key to
display the main menu.
3. Use the Up
or Down touch keys to select the Luminance and
Color menu. Use Enter
to open the menu.
4. Use Up
or Down to select Color Definition. Use Enter to
open the submenu.
5. Select the color target you wish to modify. Thereto, use Up
or
Down
to select Color Name. Use Enter to go into edit mode.
Use Up
or Down to select the color target. Use Enter to
confirm the selection.
6. To modify the luminance target, use Up
or Down to select
Luminance Target. Use Enter
to go into edit mode. Use Up
or Down to change the value. Use Enter to save the changes.
Native white The native, unmodified color tem-
perature of the LCD panel.
User A completely modifiable color tar-
get.
Name Description
To Next Page
Loading...
Need help?
General