Barco Coronis - Settings menu

On-screen display (OSD)
41
Calibration Information submenu
Settings menu
Name Description
Preset ambient value /
Measured ALC ambient
value / Average ambi-
ent value
Shows the ambient light correction
value taken into account to calcu-
late the DICOM DF, expressed in lux.
Bright luminance Shows the bright luminance value
taken into account to calculate the
DICOM DF.
Dark luminance Shows the dark luminance value
taken into account to calculate the
DICOM DF.
Ambient correction Shows the ambient light correction
value taken into account to calcu-
late the DICOM DF, expressed in cd/
m².
Name Description
DPMS Allows to switch the display power
management system on/off. See
note below.
Power LED Allows to switch the power LED’s on
state on/off. The LED's orange
DPMS state is not influenced by this
setting. So, when the display goes
into power-saving mode, the LED
will turn orange, even if it was
switched off by this setting