Barco Coronis User Manual

BARCOMED CORONIS Display properties
16
Accessing the BarcoMed tabs
Note: You must have logged on to Windows using an account
with administrator privileges in order to use the Barco portions of
the Windows Display Control Panel to change any display settings.
1. Open the Windows Display Control Panel by one of the two
methods below:
a) Start > Settings > Control Panel > Display
b) Open the “Display Properties Control Panel” by right
clicking in an empty area on the desktop, then select
Properties.
2. Click on the Settings tab.
3. Select the rectangle that represents the Barco Coronis display
whose settings you wish to change.
4. Click on the Advanced button.
5. Select the BarcoMed tab whose properties you wish to change
from the Properties screen.
Using the BarcoMed Driver Tab
Note: The BarcoMed Driver Tab is not available for the MXRT
family of Barco display controllers.
Status
The Status section displays information about the current BarcoMed
display controller, driver, and the currently selected display resolution.
Graphics Board: This displays the current BarcoMed display
controller.
Driver Version: This displays the current BarcoMed driver version.
Resolution: This displays the currently selected display resolution.

Barco Coronis Specifications

General

Brand	Barco
Model	Coronis
Category	Monitor
Language	English