Display controls
30
• Touching Up and Enter at the same time selects the maximum
value.
• Touching Down and Enter at the same time selects the
minimum value.
Stand-by switching
To switch from on state to stand-by:
1. Touch the Stand-by
touch key.
2. A warning message appears. Press the Stand-by touch key again
to switch the display into stand-by or press any other key to keep
the display in on state.
To switch from stand-by to on state:
1. Touch any of the soft touch keys.
The front illumination is switched on for about 10 seconds.
2. While the illumination is switched on, touch the Stand-by
touch
key to switch the display on.
To Next Page
Loading...
