Barco Coronis User Manual

Display controls
29
3. To open a submenu, use the Up or Down touch keys to select
the submenu. Next, press the Enter
touch key to open the
submenu.
4. To exit from a submenu, use Up
or Down to select EXIT. Next,
press Enter .
If you exit from the Main Menu, you exit the OSD.
5. To change an adjustment value or setting, use Up
or Down to
select the adjustment or setting. Next, press Enter to go into
edit mode. This is indicated by the scroll bar becoming longer..
Figure 3: : Setting is selected
Figure 4: : Edit mode is active
Use Up or Down to change the value. Use Enter to confirm
the change.
Changes are saved automatically after confirming.
6. Some items in the menus cannot be changed. They are read-only
values, displayed in light gray.
Tip:
While you are adjusting a value:
• Touching Up and Down at the same time resets to the last stored
value.
SETTINGS
DPMS On
Power LED On
User Controls On
EXIT
SETTINGS
DPMS On
Power LED On
User Controls On
EXIT

Barco Coronis Specifications

General

Brand	Barco
Model	Coronis
Category	Monitor
Language	English