BARCO MXRT control panel settings
13
Activating a configuration profile
The Configuration Profiles listbox displays a number of common
applications whose optimal configuration profile are factory-set by
default.
To activate a particular profile, select the application name from the list
and click Apply. This will add the information to the necessary Windows
registry settings. If prompted, restart Windows.
If you subsequently experience problems with your application, or if you
want to try to optimize the performance of your system on specific
applications, modify your configuration settings accordingly.
Adding a new application profile
Click the Add button in the Configuration Profiles section and enter the
name of the new application for which you want to set the
configuration parameters.
Modifying the configuration parameters
To change the configuration settings of a specific application, select the
name of that application from the Configuration Profiles listbox. Click
the Modify button. Now select or clear the rest of the configuration
controls on this tabbed dialog to obtain the desired display parameters
for the selected application.
To remove the selected configuration profile completely, select the
name of the application from the Configuration Profiles listbox click
Delete.
Note: You cannot delete the factory-set configuration profiles.
Click the Apply or OK button to enable your Configuration settings.
Barco
The Barco page allows you to switch between True Color Mode (32-bit)
and 256 Color Mode (8-bit). Use the 256 Color Mode (8-bit) if your
application requires a specific grayscale palette mode such as User
To Next Page
Loading...
Need help?
General