Barco Coronis User Manual

BARCOMED CORONIS Display properties
15
BARCOMED CORONIS Display properties
This chapter describes how to configure the displays in your BARCO
C
ORONIS Display using the tools available through the Advanced button
on the Settings tab of the Windows Display Control Panel.
Note: If you purchased Barco Medical Displays only and not a
complete B
ARCO CORONIS Display you will need to refer to the user
manual for the display controller you are using.
Introduction
After the BarcoMed Windows display controller driver is installed, three
new Display Properties tabs are available for configuring special
features of the BarcoMed Coronis display controller. The three new tabs
are:
•the BarcoMed Driver Tab,
•the BarcoMed Hardware Tab, and
•the BarcoMed Display Tab.
Languages supported
The BarcoMed tabs support the following languages:
English (U.S) (default)
Dutch
French
German
Italian
Japanese
Korean
Simplified Chinese
Traditional Chinese
To change between the languages select the correct region via the
Regional Settings Control Panel in your machine’s Start > Settings >
Control Panel.

Barco Coronis Specifications

General

Brand	Barco
Model	Coronis
Category	Monitor
Language	English