On-screen display (OSD)
36
Correction value Shows the ambient light correction
value that is taken into account in
the calculation of the display func-
tion.
Correction value Indicates the correction value in cd/
m²
Reflection coefficient Indicates the panel reflection coeffi-
cient measured in the factory.
Cont. DICOM ALC Allows to switch continuous DICOM
ALC on/off.
When switched on, the DICOM DF is
recalculated continuously taking the
averaged ambient light into
account.
When switched off, the DICOM DF is
recalculated only at the moment
the DICOM Offset is changed (see
below).
This function is available only when
the DICOM DF is selected.
ALC average time Adjustment of the period the ALC
takes to calculate the average. The
smaller this figure, the faster the
ALC average value follows changes
in the ambient light.
Name Description
To Next Page
Loading...
Need help?
General