1. Safety
1.1 General considerations
General safety instructions
• Before operating this equipment please read this manual thoroughly a nd retain it for future reference.
• Installation and preliminary a djustments should b e performed by qualified Barco personnel or by authorized B arco service deal-
ers.
• All warnings on the pr ojector and in the documentation manuals s hould be adhered to.
• All instructions for operating and use of this equipment must be fo llowed precisely.
• All local installation cod es should be adhered to.
Notice on safety
This equipment is built in accordance with the requirements o f the international safety standards IEC60950 -1, E N60950-1,
UL60950-1 and CA N/CSA C22.2 No.60950-1, w hich are the safety standards of information technology equipment including
electrical bus iness equipment. Thes e safety standards impos e important requirements on the use of safet
y critical components,
materials and ins ulation, in order to protect the user or operator against risk of electric s hock and energy haz ard and having access
to live parts. Safety standards also impose limits to the internal and external temperature rises, radiation levels, mechanical stability
and strength, e nclosure construction and protection against the risk of fire. Sim ulated single fau
lt condition testing ensures the
safety of the equipm ent to the user even when the equipment’s norm al operation fails.
Users definition
Throughout this m anual, the term SERVICE P ERSO NNEL refers to persons having appropriate technical training and experience
necessary to be knowledgeable of potential hazards to which t hey are exposed (including, but not limited to HIGH VOLTA GE ELEC -
TRIC and ELECTRONIC CIRCUITRY and HIGH B RIGHTNESS PROJE CTORS) in performing a task, and of m easures to minimize
the potential risk to themselves or other persons. The term USER and OPERATOR refers to any person other than SERVICE PER -
SONNEL, A UT HO RIZE D to operate professional projection systems located in REST RICTED ACCE SS LOCAT IO NS.
The DLP C inema Systems are intended "F OR PROFES SIO N AL USE ON LY" by AUTHO RIZE D PE R S ONNEL familiar with poten -
tial hazar ds associated with high voltage, high intensity light beams, ultraviolet e xposure and high temperatures generated by the
lamp and as sociated c ircuits. Only qualified SE RVICE PERSO NNE L, knowledgeable of suc h risks, ar e allowed to perform service
functions inside the product enclosure.
Restricted access location
The DP2K-20C digital projector may only be installed in a restricted access location, due to the temperature rise of parts of the
equipment (air outlet). The definition of a “restricted access location" is a location for equipm ent where both of following paragraphs
apply:
• Access can only be gained by SERVICE P ERS ONS or by USE RS who have been instructed about the reasons for the restriction
applied to the location and about the precautions that shall be t aken.
• Access is through the use of the tool or lock and k ey, or other mea ns of security, and is controlled by the authority responsible
for the location.
Owner ’s record
The part n umber and serial number are printed on a label which is stuck on the respective part. Record these num bers in the spaces
provided below. R efer to them whenever you call upon your B arco dealer regarding this produc t.
Product article number
Product serial number
Dealer
4 R59770351 DP2K-20C 02/02/2010
To Next Page
Loading...
Need help?
General