5. Lenses & lens holder
5.4 Lens removal
How to remove a lens from the projector lens holder ?
1. Support the lens with one hand while you unlock the lens holder by sliding the loc k handle towards the “unlocked” position as
illustrated.
Image 5-8
2. Gently pull the lens out of the lens holder.
Image 5-9
Remove lens
It’s recomm e nded to place the Lens caps of the original Lens packaging, back on both sides o f the removed
Lens to protect the optics of the Lens.
It’s recommended to p lace the foam ru bber o f the original projector packag ing, back in the Lens o pening to
prevent intrusion of dust. Note that this foam rubber is p acked in a plastic b ag to prevent the dust, em itted by
the foam, from ente r ing th
e pro jector.
R59770351 DP2K-20C 02/02/2010 49
To Next Page
Loading...
Need help?
General