ImagePRO-II • User’s Guide 57
4. Menu Orientation
Configuring Outputs
~ +H-V
~ -H+V
~ -H-V
The default setting for HD-15 Sync is SOG/Y for most formats. For NTSC and
PAL, the default setting is CSync with equalizations on.
• For the HD-15 SOG/Y option, the options are:
~ Standard
~ Tri-level
~ Not available (n/a), if HD-15 Sync is anything other than SOG/Y
pÉííáåÖ=`çäçêpé~ÅÉI=p~ãéäÉ=o~íÉI=~åÇ=_áí=aÉéíÜ=
The ImagePRO-II supports setting the output colorspace, sample rate and bit depth. Within
limits, you can modify these settings for some outputs.
From the Output Menu, select the ColorSpace/Bit Depth option. The following menu
appears, showing valid options for each output type.
Figure 4-34. Output Color/Sample/Bit Menu
The options vary according to the output type:
• DVI — The option is:
~ RGB, 4:4:4, 24 bit
The preceding setting is also the default setting upon format change, or when the
EDID information is invalid or not present.
• HD-15 — The options are:
~ RGB, 4:4:4, 30 bit
~ YCbCr, 4:4:4, 30 bit
The default settings upon format change or when EDID information is invalid or
not present are:
~ Sync on G/Y: YCbCr, 4:4:4, 30 bit
~ HV Sync or CSync: RGB, 4:4:4, 30 bit
• HDMI — The available options are based on the output EDID information, and can
include:
~ RGB, 4:4:4, 24 bit
~ RGB, 4:4:4, 30 bit
~ RGB, 4:4:4, 36 bit
~ YCbCr, 4:4:4, 24 bit
~ YCbCr, 4:4:4, 30 bit
OUT COLOR/SAMPLE/BIT
> DVI RGB, 4:4:4, 24bit
HD15 RGB, 4:4:4, 30bit
HDMI RGB, 4:4:4, 24bit
DP RGB, 4:4:4, 24bit
To Next Page
Loading...
