ImagePRO-II • User’s Guide 59
4. Menu Orientation
Configuring Outputs
The options on this menu are:
• Contrast — For outputs, the Contrast adjustment range is 0% to 200%. The
default setting is 100%.
• Brightness — The Brightness adjustment range is 0% to 200%. The default
setting is 100%.
• Color Balance — The Out Color Balance Submenu, shown in the following
illustration, lets you refine RGB values, plus the Hue and Saturation levels. You
can also restore color balance default settings.
Figure 4-36. Output Color Balance Menu
~ The RGB Contrast and Brightness settings are adjustable within a
range of 0% to 200%. The default setting for all of these properties is
100%.
~ Hue is adjustable within a range of -180 to +180 degrees. The default
setting is 0 degrees.
~ Saturation is adjustable within a range of 0% to 200%. The default
setting is 0%.
~ Reset All resets all custom values to their default settings.
• Gamma — This option is adjustable within a range of 0.3 to 3.0. The default
setting is 1.0.
• Monochrome — This option sets the color values of the output display to shades
of a single color, typically grayscale. Monochrome is either On or Off. The default
setting is Off.
OUT COLOR BALANCE
> Red Contrast 100
Red Brightness 100
Green Contrast 100
Green Brightness 100
Blue Contrast 100
Blue Brightness 100
Hue +0
Saturation 0
Reset All
To Next Page
Loading...
